Shop Online   |   Pickering Laboratories   |  



Artificial Urine for Product Testing

Artificial Perspiration Artificial Saliva Artificial Urine Buyers Guide to Artificial Perspiration Testing Solutions

Pickering Laboratories' Artificial Urine is Formulated to Test Products for Corrosion, Test Sterile Urethral Catheters, and Growing Urological Pathogens

1700-0016 Artificial Urine for Corrosion Testing of Urological Implants, Stabilized

This artificial urine is designed for testing metallic biomaterials used to produce urological implants and catheters. This is a ready-to-use solution at pH 6.0+/- 0.4. This formulation contains non-toxic preservative to avoid bacteria growth and can be stored at room temperature. Custom formulations are also available.

Bottles of Artificial Urine 

Sodium Chloride 6.773 g/L
  Sodium Phosphate Monobasic, Dihydrate 1.33 g/L
  Potassium Chloride 6.065 g/L
  Calcium Chloride Dihydrate 0.883 g/L
  Sodium Citrate Dihydrate 0.584 g/L
  Sodium Phosphate Dibasic 0.435 g/L
  Sodium Sulfate 2.431 g/L
  Magnesium Sulfate, Heptahydrate 0.731 g/L
  Ammonium Chloride 2.322 g/L
  Pro-Clean 0.3 mL/L

1700-0017 DIN EN 1616:1999 Artificial Urine

The artificial urine is prepared according to DIN EN 1616:1999 standard procedure. DIN EN 1616 specifies the method to test sterile urethral catheters. This ready-to-use solution should be stored frozen to avoid bacteria growth. The pH of the solution is 6.6+/- 0.1



25.0 g/L
  Sodium Chloride 9.0 g/L
  Disodium Hydrogen Orthophosphate, anhydrous 2.5 g/L
  Potassium Dihydrogen Orthophosphate 2.5 g/L
  Ammonium Chloride 3.0 g/L
  Creatinine 2.0 g/L
  Sodium Sulphite, hydrated 3.0 g/L

1700-0018 Artificial Urine Medium for Growing Urological Pathogens

This ready-to-use artificial urine solution closely resembles composition of human urine and can be used for clinical studies as well as for product testing. This formulation supports growth of wide range of urinary pathogens and it is also capable of forming crystals similar to these found in natural urinary tract infections. It can be used as negative controls in laboratory testing. pH of the Artificial Urine Medium is 6.5+/- 0.1. This product is stored frozen.


Catalog # Description Quantity


1700-0016 Artificial Urine for Corrosion Testing of Urological Implants, Stabilized.  Shop online > 200 mL
1700-0017 DIN EN 1616:1999 Artificial Urine. Shop online > 200 mL
1700-0018 Artificial Urine Medium for Growing Urological Pathogens. Shop online > 200 mL
1700-0600 Artificial Urine, Stabilized. Shop online > 200 mL

NOTE: Custom formulations are available.

Request a Quote: 1-800-654-3330 or


^ Back to top